Surface Enhancer® Brand

Antimicrobial Resin Flow Technology

Surface Enhancer 360 Prevent logo
Surface Enhancer With and Without

Surface Enhancer® 360° PREVENT with BioCote®

In 1992, resin flow inside the mold was a massive problem for rotomolders around the world. Mold In Graphic Systems® answered that call, engineering the world’s first resin flow technology called Surface Enhancer®.

Since then, Surface Enhancer® has become the go to Brand for molders wanting to remove defects notoriously found in rotomolded polyolefin and nylon products that cause scrap such as pinholes, static lines, bridging, thinning, blow-outs and voids around threads and inserts.

Those defects result in scrap, time and money loss but more importantly, they create a habitat where microbes and dirt can thrive uncathed from cleaning and sanitation operations occuring on the outside.

Surfance Enhancer Product ImageMold In Graphic Systems® engineering team has once again answered the call, this time partnering with market leading antimicrobial technology provider BioCote® to create the world’s first antimicrobial resin flow technology called Surface Enhancer® 360° PREVENT with BioCote® .

Rotomolded plastic surfaces allow microbes to multiply in as little as 20 minutes that when left unprotected continue for months as they extract nutrients from their surrounding areas. This compromises the performance properties of the plastic that can cause premature product failure.

Applying Surface Enhancer® 360° PREVENT to the entire mold prior to the rotomolding process not only reduces scrap parts while simultaneously removing microbe harboring pin holes, voids, and blemishes from rotomolded products, BioCote® silver ion antimicrobial technology further enhances the performance and value of those products for their expected lifetime as well by removing over 99% of microbes on the surface within 2 hours.

BioCote® protected products are the only antimicrobial products proven to deliver a real-life benefit in multiple environments which has been measured and demonstrated in hospitals, care homes, schools, food processing environments and more. It can be just as effective for agricultural crates, fishery totes, food service trays, high-chairs, booster and car seats, playground equipment and waste carts that include biohazard and medical waste containers.

If you are interested in Surface Enhancer® 360° PREVENT from Mold In Graphic Systems® or in protecting your own products with proven BioCote® antimicrobial technology, please do not hesitate to get in touch with a member of the team on +44 (0) 2477 712 489. Alternatively, you can contact us here.

Antimicrobial Coatings Powder Technology Inc.Stardust Banner Image */